Gas logs can be made from wood, bamboo, and even plastic.
The easiest way to make them is to cut them into a long log, but you can also use a drill to drill holes into the logs to create the logs.
Start by cutting the log into long pieces.
You want the logs that are at least 4 to 6 feet long.
(This will be the largest one.)2.
Cut the logs into pieces, so they are not too long.3.
Put the logs in a large pot.4.
Add a bit of water and a little salt.5.
Add the water and the salt, and bring to a boil.6.
Add some water to the pot and turn it down to a simmer.7.
When the water comes to a rolling boil, turn it off.8.
Allow the logs, water, and salt to cook for at least 30 minutes, and up to an hour.
The longer you cook, the longer the logs will get to keep the temperature down.9.
Remove the logs and the pot.10.
Use a sieve to remove the solids from the logs as they boil.11.
Pour the water out of the logs (do not use a funnel, as the water can burn the soles) and let cool.12.
Cut them into pieces.13.
Use the same amount of water to wash the pieces as you did to make the logs first.14.
Put a bit more water in the pot, and turn down the heat to low.15.
Add more water as necessary to keep it from boiling.16.
Let the logs sit for about 20 minutes.17.
Remove from the heat and let sit for another 10 minutes.18.
Put some foil over the top of the pieces to protect them from the cold.19.
Put on some heat-resistant clothes.20.
Keep the pieces warm and dry until you want to use them again.